Has your car also started to rattle the hood on bumps? Then this advice from a seasoned motorist will definitely come in handy.
Many cars have unregulated bonnet stops. For example, there are four on Duster. Over time, the rubber dries up, the hood gets “freedom of movement” and begins to rumble on bumps. And so much that you think – is it not running?
The stops do not have to be changed.
I propose to cut thin rings 1-3 mm thick (depending on the backlash) from a soft hose with a diameter of 16–20 mm and make a cut on each.
We lift the upper part of the rubber stop and put on the cut washer on the neck of this “fungus”. By selecting the washers of the desired thickness, the gap can be completely eliminated.
The prize to the author of the council is an Airline automotive compressor.
Dear car connoisseurs! When sending advice, do not forget to provide your mailing address with a six-digit index, last name, first name and middle name (fully), as well as a telephone number for communication. This will greatly simplify and speed up sending you well-deserved prizes.
You can send your advice by e-mail [email protected] If possible, illustrate your own know-how with photographs and / or diagrams.
- How to save 1700 rubles with a magnet, read here.
Error in the text? Select it with the mouse! And press: Ctrl + Enter